Dezl 560 Device Firmware
Σελίδα 1 από 1
Dezl 560 Device Firmware
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]
as of August 5, 20154
Change History
Changes made from version 3.80 to 3.90:
Added support for the new Hungarian traffic format.
Improved file system stability.
Changes made from version 3.70 to 3.80:
Fleet Management Interface (FMI):
Fixed an issue that caused invalid FMI ETA messages to be sent.
Updated FMI to allow ETAs to be requested for destinations that are not FMI stops.
Changes made from version 3.60 to 3.70:
Dezl 560:
Added a feature to disable demo mode when FMI is enabled.
Improved truck routing in Poland.
Hours of Service (HOS):
Added a feature for automatic status updates.
Added support for passenger-carrying vehicles.
Added support for adverse conditions.
Added a server message to log off the driver.
Added a set status page on driver login.
Added an IFTA file download feature.
Fleet Management Interface (FMI):
Added support for 56K baud rate.
Fixed an error that prevented D602 stops from working.
Fixed an error that caused data to abort when responding to long, canned text messages.
Changes made from version 3.50 to 3.60:
Implemented FMI custom forms.
Updated and improved the FMI features.
Fixed an error that caused AOBRD driver logs to show zero driving mileage.
Improved software stability.
Changes made from version 3.40 to 3.50:
Fixed an error that caused OTR Truck restrictions to remain after changing to Delivery mode.
Fixed an error in the HOS Violation calculation.
Fixed an error that caused the unit to incorrectly avoid certain routes.
Fixed an error that caused all favorites to display in along-route searches.
Fixed an error that caused the top of the fuel log list to display after a user completes a change to a fuel log entry.
Fixed several map display errors.
Improved postal code search process.
Improved software stability.
FMI (Fleet Management Interface) Changes:
Fixed an error that caused FMI messages to truncate.
Fixed an error that caused FMI stops to be resent if they are re-ordered.
Fixed an error that caused an incorrect popup when deleting an active stop using FMI.
Fixed an error that required clearing data after a message was deleted remotely.
Changes made from version 3.30 to 3.40:
Fixed an error that caused circuitous routing in Truck mode.
Fixed an error that caused routing via ramps at motorway junctions in Truck mode.
Fixed an error that caused circuitous routes via ferries in Truck mode, while navigating in Greece.
Fixed an error that caused new maps to fail authentication.
Added a feature to route Trucks according to European tunnel restrictions.
Changes made from version 3.20 to 3.30:
Fixed an error that caused truck restrictions to be shown for RVs and delivery vehicles.
Fixed an error that caused some address searches to fail.
Fixed an error that caused myTrends to re-enable after a power cycle.
Added the ability to display warnings for steep ascents.
Improved route calculations involving highway ramps.
Improved software stability.
FMI (Fleet Management Interface) Changes:
Fixed an error that kept server-created waypoint categories from appearing on the device.
Fixed an error that kept stop statuses from being sent for stops moved by the server.
Fixed an error where drivers were not notified of dispatcher-deleted stops.
Fixed an error that caused the Auto Arrival prompt to sometimes not appear.
Fixed an error that allowed driver statuses to be changed without the correct password.
Fixed errors with canned response creation and deletion.
Changes made from version 3.10 to 3.20:
Fixed an error that caused searches using international characters to omit some results.
Fixed an error that caused a long delay when searching for addresses in the Ukraine.
Fixed several errors with the Trip Planner.
Fixed an error that caused the wrong speed limits to display in some areas.
Fixed an error that caused the device to freeze when routing through roundabouts on 3rd-party maps.
Fixed an error that caused route calculation times to lengthen over time.
Fixed an error that caused search subcategories to not display for some 3rd-party POI files.
Updated battery charging mode to comply with new California energy regulations.
Fixed an error that caused truck arrival times in Europe to be underestimated.
Added the ability for a driver to see the hours remaining before incurring an hours-of-service violation.
Fixed an error that caused truck routes to exit a highway and then immediately rejoin it.
FMI (Fleet Management Interface) Changes:
Improved performance when dealing with large numbers of text messages or stops.
Fixed an error that prevented the Delete Data All command from deleting all data.
Added a new command to send 2,000-character text messages.
Fixed an error that caused text containing international characters to truncate when sent to the server.
Changes made from version 2.90 to 3.10:
Fixed truck routing errors (a map update is required, 2013.21 EU).
Added support for Passenger Seat provisions of HOS rules.
Added support for HOS rule changes that take effect in summer 2013.
Drivers will no longer be automatically set to On Duty status when not moving and in Driving status.
Fixed a possible incorrect violation warning when switching from Sleeper to Driving status.
Added Automatic On-Board Recording Device (AOBRD) support when used with a compatible Fleet Management Interface system.
Changes made from version 2.80 to 2.90:
Fixed a bug that caused the devices with nearly full storage to crash when loading map updates.
Changes made from version 2.70 to 2.80:
Improved truck route arrival-time estimates.
Fixed a map-drawing bug for routes started from the Fleet Management Interface.
Changes made from version 2.50 to 2.70:
Improved the delay time in Traffic Map drawing
Default to AZERTY keyboard in Belgian locale
Updated to comply with France Safety Camera decree
Added Support for Yandex Traffic Service in Russia
Support for RDS based live Parking information update
Fixed issues with alerts when unit is in charging mode
Routing improvements with Historic Traffic
Added display exit name along with the exit number
Improved several Map drawing features
Fixed some issues with GPX importing
Fixed some issues in Custom Avoidances feature
Several other cosmetic improvements added in UI
Added cosmetic improvements to FMI features
Improved the HOS module
Added Truck Parking subcategory for Trucking POIs
Improved the Truck Speed Limits at roundabouts
Improves along route searching for POIs for NTTS
Changes made from version 2.30 to 2.50:
Note: During this update the screen of your device will go blank for up to 1 minute. Please do not turn off your device until the update has completed.
All map files now updated when the user updates the maps.
Fixed error with custom road avoidances.
myTrends routes now use previously traveled roads when possible.
Improved RV routing for low gross-weight vehicles.
Fixed error that caused Hours of Service to reset incorrectly after 34-hour break.
Exit Services in Europe now shows Fuel Stations instead of Truck Stops.
Added support for industrial complex trucking category for future Europe maps.
Many other minor improvements and fixes.
Changes made from version 2.20 to 2.30:
Corrected an issue where trafficTrends data was not being used for route calculations when enabled.
Changes made from version 2.10 to 2.20:
Fixed an issue where changing the route Calculation Mode did not update the current trip.
Fixed an issue where the More Data Layout fields on the map were not always updated.
Changes made from version 2.00 to 2.10:
Fixed incorrect speed limit displaying for areas where speed limit depends on dawn and dusk times.
Fixed an issue with services at truck stops not being translated.
Fixed an issue with Custom Avoidances not saving properly.
Fixed an issue where an IFTA Logging Trip Report may not be recorded.
Improved performance of IFTA Logging when there are several Trip Reports.
Fixed an issue where a Hours of Service 14 hour violation warning would not display when switching to driving.
Added Fleet Management icons to the custom Main Menu.
Fixed an issue that caused the Screenshot not to work.
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]
as of August 5, 20154
Change History
Changes made from version 3.80 to 3.90:
Added support for the new Hungarian traffic format.
Improved file system stability.
Changes made from version 3.70 to 3.80:
Fleet Management Interface (FMI):
Fixed an issue that caused invalid FMI ETA messages to be sent.
Updated FMI to allow ETAs to be requested for destinations that are not FMI stops.
Changes made from version 3.60 to 3.70:
Dezl 560:
Added a feature to disable demo mode when FMI is enabled.
Improved truck routing in Poland.
Hours of Service (HOS):
Added a feature for automatic status updates.
Added support for passenger-carrying vehicles.
Added support for adverse conditions.
Added a server message to log off the driver.
Added a set status page on driver login.
Added an IFTA file download feature.
Fleet Management Interface (FMI):
Added support for 56K baud rate.
Fixed an error that prevented D602 stops from working.
Fixed an error that caused data to abort when responding to long, canned text messages.
Changes made from version 3.50 to 3.60:
Implemented FMI custom forms.
Updated and improved the FMI features.
Fixed an error that caused AOBRD driver logs to show zero driving mileage.
Improved software stability.
Changes made from version 3.40 to 3.50:
Fixed an error that caused OTR Truck restrictions to remain after changing to Delivery mode.
Fixed an error in the HOS Violation calculation.
Fixed an error that caused the unit to incorrectly avoid certain routes.
Fixed an error that caused all favorites to display in along-route searches.
Fixed an error that caused the top of the fuel log list to display after a user completes a change to a fuel log entry.
Fixed several map display errors.
Improved postal code search process.
Improved software stability.
FMI (Fleet Management Interface) Changes:
Fixed an error that caused FMI messages to truncate.
Fixed an error that caused FMI stops to be resent if they are re-ordered.
Fixed an error that caused an incorrect popup when deleting an active stop using FMI.
Fixed an error that required clearing data after a message was deleted remotely.
Changes made from version 3.30 to 3.40:
Fixed an error that caused circuitous routing in Truck mode.
Fixed an error that caused routing via ramps at motorway junctions in Truck mode.
Fixed an error that caused circuitous routes via ferries in Truck mode, while navigating in Greece.
Fixed an error that caused new maps to fail authentication.
Added a feature to route Trucks according to European tunnel restrictions.
Changes made from version 3.20 to 3.30:
Fixed an error that caused truck restrictions to be shown for RVs and delivery vehicles.
Fixed an error that caused some address searches to fail.
Fixed an error that caused myTrends to re-enable after a power cycle.
Added the ability to display warnings for steep ascents.
Improved route calculations involving highway ramps.
Improved software stability.
FMI (Fleet Management Interface) Changes:
Fixed an error that kept server-created waypoint categories from appearing on the device.
Fixed an error that kept stop statuses from being sent for stops moved by the server.
Fixed an error where drivers were not notified of dispatcher-deleted stops.
Fixed an error that caused the Auto Arrival prompt to sometimes not appear.
Fixed an error that allowed driver statuses to be changed without the correct password.
Fixed errors with canned response creation and deletion.
Changes made from version 3.10 to 3.20:
Fixed an error that caused searches using international characters to omit some results.
Fixed an error that caused a long delay when searching for addresses in the Ukraine.
Fixed several errors with the Trip Planner.
Fixed an error that caused the wrong speed limits to display in some areas.
Fixed an error that caused the device to freeze when routing through roundabouts on 3rd-party maps.
Fixed an error that caused route calculation times to lengthen over time.
Fixed an error that caused search subcategories to not display for some 3rd-party POI files.
Updated battery charging mode to comply with new California energy regulations.
Fixed an error that caused truck arrival times in Europe to be underestimated.
Added the ability for a driver to see the hours remaining before incurring an hours-of-service violation.
Fixed an error that caused truck routes to exit a highway and then immediately rejoin it.
FMI (Fleet Management Interface) Changes:
Improved performance when dealing with large numbers of text messages or stops.
Fixed an error that prevented the Delete Data All command from deleting all data.
Added a new command to send 2,000-character text messages.
Fixed an error that caused text containing international characters to truncate when sent to the server.
Changes made from version 2.90 to 3.10:
Fixed truck routing errors (a map update is required, 2013.21 EU).
Added support for Passenger Seat provisions of HOS rules.
Added support for HOS rule changes that take effect in summer 2013.
Drivers will no longer be automatically set to On Duty status when not moving and in Driving status.
Fixed a possible incorrect violation warning when switching from Sleeper to Driving status.
Added Automatic On-Board Recording Device (AOBRD) support when used with a compatible Fleet Management Interface system.
Changes made from version 2.80 to 2.90:
Fixed a bug that caused the devices with nearly full storage to crash when loading map updates.
Changes made from version 2.70 to 2.80:
Improved truck route arrival-time estimates.
Fixed a map-drawing bug for routes started from the Fleet Management Interface.
Changes made from version 2.50 to 2.70:
Improved the delay time in Traffic Map drawing
Default to AZERTY keyboard in Belgian locale
Updated to comply with France Safety Camera decree
Added Support for Yandex Traffic Service in Russia
Support for RDS based live Parking information update
Fixed issues with alerts when unit is in charging mode
Routing improvements with Historic Traffic
Added display exit name along with the exit number
Improved several Map drawing features
Fixed some issues with GPX importing
Fixed some issues in Custom Avoidances feature
Several other cosmetic improvements added in UI
Added cosmetic improvements to FMI features
Improved the HOS module
Added Truck Parking subcategory for Trucking POIs
Improved the Truck Speed Limits at roundabouts
Improves along route searching for POIs for NTTS
Changes made from version 2.30 to 2.50:
Note: During this update the screen of your device will go blank for up to 1 minute. Please do not turn off your device until the update has completed.
All map files now updated when the user updates the maps.
Fixed error with custom road avoidances.
myTrends routes now use previously traveled roads when possible.
Improved RV routing for low gross-weight vehicles.
Fixed error that caused Hours of Service to reset incorrectly after 34-hour break.
Exit Services in Europe now shows Fuel Stations instead of Truck Stops.
Added support for industrial complex trucking category for future Europe maps.
Many other minor improvements and fixes.
Changes made from version 2.20 to 2.30:
Corrected an issue where trafficTrends data was not being used for route calculations when enabled.
Changes made from version 2.10 to 2.20:
Fixed an issue where changing the route Calculation Mode did not update the current trip.
Fixed an issue where the More Data Layout fields on the map were not always updated.
Changes made from version 2.00 to 2.10:
Fixed incorrect speed limit displaying for areas where speed limit depends on dawn and dusk times.
Fixed an issue with services at truck stops not being translated.
Fixed an issue with Custom Avoidances not saving properly.
Fixed an issue where an IFTA Logging Trip Report may not be recorded.
Improved performance of IFTA Logging when there are several Trip Reports.
Fixed an issue where a Hours of Service 14 hour violation warning would not display when switching to driving.
Added Fleet Management icons to the custom Main Menu.
Fixed an issue that caused the Screenshot not to work.
Έχει επεξεργασθεί από τον/την Santosan στις Πεμ 6 Αυγ 2015 - 7:08, 7 φορές συνολικά
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Dezl 560 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 3.40, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Dezl 560 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 3.50, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Dezl 560 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 3.60, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Dezl 560 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 3.70, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Dezl 560 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 3.80, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Dezl 560 Device Firmware
Έχουμε αναβάθμιση στην έκδοση 3.90, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Παρόμοια θέματα
» Dezl 570 Device Firmware
» Dezl 770 Device Firmware
» dēzl™ 760LMT Device Firmware
» nuvi 67/68 Device Firmware
» HRM-Run Device Firmware
» Dezl 770 Device Firmware
» dēzl™ 760LMT Device Firmware
» nuvi 67/68 Device Firmware
» HRM-Run Device Firmware
Σελίδα 1 από 1
Δικαιώματα σας στην κατηγορία αυτή
Δεν μπορείτε να απαντήσετε στα Θέματα αυτής της Δ.Συζήτησης