fenix® 5X Device Firmware
Σελίδα 1 από 1
fenix® 5X Device Firmware
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]
as of September 22, 2017
Notes:
WARNING: If this software is uploaded to a device other than that for which it is designed, you will not be able to operate that device.
If attempts to upload software fail, you may need to return the device to Garmin for service.
Change History
Changes made from version 5.40 to 6.00:
Added support for Rep Counting during Strength and Cardio workouts which can be created on Garmin Connect Web and Garmin Connect Mobile. To enable Rep Counting, ensure that Settings > Activities & Apps > Strength > Rep Counting is enabled. Start the timer to automatically count reps during sets. Press the lap key to rest between sets. You can edit your last set's number of reps and weight during a rest period. Press the lap key to advance to the next set.
Added support for All-Day Stress. To view the Stress widget, hold the Up key from any widget, and select Add Widget > Stress. You can view your current stress measurement on the widget page. Press the enter key to view a graph of your stress over the last four hours. Press Down to access the Four-Fold Breath relaxation timer.
Added support for setting up Wi-Fi Networks on device. After syncing with Garmin Express or Garmin Connect Mobile at least once, go to Settings > Wi-FI > Add Network to search for Wi-Fi networks. Select a network. If the network is secure, enter its password to join it.
Added support for manual calibration of the Barometer. (Settings > Sensors & Accessories > Barometer > Calibrate)
Added support for Hourly Alerts. (Settings > System > Time > Alerts > Hourly)
Added support for configuring the track color of saved activities. (Settings > Map > Track Color)
Improved device key handling while using Connect IQ apps.
Improved the course navigation icons for better visibility and contrast.
Fixed an issue causing Varia UT800 Smart Headlights to periodically disconnect or power off during a ride.
Fixed an issue causing the Running Dynamics Pod to disconnect when using Connect IQ Apps.
Fixed a potential issue preventing a course from being joined when not joining it at the start.
Fixed a potential issue causing Personal Records to be reported inaccurately.
Fixed an issue where the device would not transition to the climb screen while using Auto Climb in certain situations.
Fixed an issue where the sunrise and sunset alarms were not working as expected.
Fixed an issue where the elevation plot for a single activity in a multisport, would display the elevation history of the entire activity.
Fixed an issue where certain artifacts were being drawn on the map page while panning or zooming.
Fixed an issue where the device might crash when editing settings for a multisport activity during a transition.
Fixed an issue where the map would not refresh course data if it was edited during active navigation.
Fixed a potential issue where the watch may appear frozen on the watchface, when exiting out early from an active course route calculation.
Fixed a potential issue preventing some Training Status data from being uploaded to Garmin Connect.
Changes made from version 5.30 to 5.40:
Fixed an issue in which optical heart rate became much less precise during an activity if Connect IQ apps were installed on the watch.
Fixed an issue in which the prompt to enter scores between holes during Golf activities was not shown.
Changes made from version 5.10 to 5.30:
Added support for Treadmill Calibration. When saving a Treadmill running activity for the first time, you will be given the option to enter the distance that the treadmill recorded. This will improve the accuracy of the distance that the watch records during future treadmill activities. You can also choose to calibrate when saving any treadmill activity. When you are done with your activity, stop the timer, scroll down to 'Calibrate & Save.' Then, enter the distance that the treadmill recorded. For accuracy, these options become available when recording an activity longer than 1 mile or 1.5 kilometers.
Added support for Connect IQ SDK 2.3.2.
Added support for viewing distances to Golf hazards and course targets.
Added support for persisting Heart Rate data on the widget across a power cycle.
Added support for viewing smart notifications on Varia Vision.
Added support for configuring the Controls menu with more than 10 items.
Added support for accessing Altimeter, Barometer and Compass widgets through the Controls menu.
Added support for adjusting the device backlight using the Controls menu.
Added support for 'Flashlight'. This will be accessible from the System Hotkeys and the Controls menu.
Improved the altimeter and barometer locking mechanism for water sport activities.
Improved the readability of long golf course names on device.
Fixed an issue where the user might see a blank black banner while navigating a shorter course.
Fixed an issue where the device would crash when attempting to continue a paused golf round.
Fixed an issue where the Virtual partner page was being incorrectly added to the activity data page loop while navigating.
Fixed a potential issue where large elevation values were being reported on the summary page for certain activities.
Fixed a potential issue where certain activities would show extremely high total elapsed time when trying to save them.
Fixed an issue where the gesture backlight was not working as expected during Do Not Disturb.
Fixed an issue where the heart rate target gauge would not work as expected during a workout when using wrist based heart rate.
Fixed an issue where the directions displayed on the Dog Tracker widget would not update in real time.
Fixed a potential issue where the data field page may have ghost lines when visiting the DogTracker page during an activity.
Fixed an issue where the device may not respond to button presses when using the lap key during a lap Swimming workout with Drill log disabled.
Fixed an issue where the backlight would turn off (outside of an activity) even though the backlight setting was set to 'No Timeout'.
Fixed an issue where routes created on Basecamp did not have elevation information after being transferred to the device.
Fixed an issue where the device would appear to be frozen, when connected to a computer.
Fixed an issue where the cog value could not be set to a value higher than 45, while setting up a Shimano Di2 Shifter.
Improved the user experience and accuracy of the Round-trip Course feature.
Fixed an issue where the 'Distance remaining' data field was displaying incorrect data when navigating to a POI.
Fixed an issue where strange characters were appearing on the map for Abu Dhabi.
Fixed a potential issue where the device would snap the user's track to nearby roads on the map.
Fixed an issue where a FaceIt CIQ watchface would flash, when transitioning to the watch face. (Requires Display 2.40)
Fixed an issue where Sunrise and Sunset times were showing invalid values on a CIQ watch face. (Requires Display 2.40)
Changes made from version 4.10 to 5.10:
Added support for Treadmill Calibration. When saving a Treadmill running activity for the first time, you will be given the option to enter the distance that the treadmill recorded. This will improve the accuracy of the distance that the watch records during future treadmill activities. You can also choose to calibrate when saving any treadmill activity. When you are done with your activity, stop the timer, scroll down to 'Calibrate & Save.' Then, enter the distance that the treadmill recorded. For accuracy, these options become available when recording an activity longer than 1 mile or 1.5 kilometers.
Added support for Connect IQ SDK 2.3.2.
Added support for viewing distances to Golf hazards and course targets.
Added support for persisting Heart Rate data on the widget across a power cycle.
Added support for viewing smart notifications on Varia Vision.
Added support for configuring the Controls menu with more than 10 items.
Added support for accessing Altimeter, Barometer and Compass widgets through the Controls menu.
Added support for adjusting the device backlight using the Controls menu.
Added support for 'Flashlight'. This will be accessible from the System Hotkeys and the Controls menu.
Improved the altimeter and barometer locking mechanism for water sport activities.
Improved the readability of long golf course names on device.
Fixed an issue where the user might see a blank black banner while navigating a shorter course.
Fixed an issue where the device would crash when attempting to continue a paused golf round.
Fixed an issue where the Virtual partner page was being incorrectly added to the activity data page loop while navigating.
Fixed a potential issue where large elevation values were being reported on the summary page for certain activities.
Fixed a potential issue where certain activities would show extremely high total elapsed time when trying to save them.
Fixed an issue where the gesture backlight was not working as expected during Do Not Disturb.
Fixed an issue where the heart rate target gauge would not work as expected during a workout when using wrist based heart rate.
Fixed an issue where the directions displayed on the Dog Tracker widget would not update in real time.
Fixed a potential issue where the data field page may have ghost lines when visiting the DogTracker page during an activity.
Fixed an issue where the device may not respond to button presses when using the lap key during a lap Swimming workout with Drill log disabled.
Fixed an issue where the backlight would turn off (outside of an activity) even though the backlight setting was set to 'No Timeout'.
Fixed an issue where routes created on Basecamp did not have elevation information after being transferred to the device.
Fixed an issue where the device would appear to be frozen, when connected to a computer.
Fixed an issue where the cog value could not be set to a value higher than 45, while setting up a Shimano Di2 Shifter.
Improved the user experience and accuracy of the Round-trip Course feature.
Fixed an issue where the 'Distance remaining' data field was displaying incorrect data when navigating to a POI.
Fixed an issue where strange characters were appearing on the map for Abu Dhabi.
Fixed a potential issue where the device would snap the user's track to nearby roads on the map.
Fixed an issue where a FaceIt CIQ watchface would flash, when transitioning to the watch face. (Requires Display 2.40)
Fixed an issue where Sunrise and Sunset times were showing invalid values on a CIQ watch face. (Requires Display 2.40)
Changes made from version 3.30 to 4.10:
Added support for Connect IQ 2.3.1 SDK. See the Connect IQ 2.3.1 SDK for a list of new features.
Added support for pre-defined Alarm labels. (Menu > Clock > Alarm Clock > Select an alarm > Label)
Added support for new VIRB remote commands.
Added support for adding widgets through the context menu. (Scroll to a widget > Menu Key)
Improved the VIRB widget to accurately reflect the settings available on the connected VIRB, which may vary with model.
Fixed an issue where the activity summary information for multisport profiles only represented data from the last leg.
Fixed an issue where the device screen seems to pulsate when using a white background, in low power mode.
Fixed an issue where ConnectIQ data fields were not able to record information to FIT files.
Fixed an issue where the HMD configuration won't match what is being displayed on device.
Fixed an issue where the device backlight would not work as expected when Do Not Disturb was enabled.
Fixed an issue where the 'Lap Ascent' field was not displaying valid data on the lap alert page.
Fixed an issue where the Indoor Row summary information was displaying distance metrics, instead of stroke data.
Fixed a potential issue where the device could freeze when dismissing multiple smart notifications.
Fixed a potential issue where the Training Effect value on post activity summary won't match the value shown on Garmin Connect.
Improved the consistency of routing results when using segments with courses.
Fixed an issue where the map wouldn't feel responsive when the user was off-course at the beginning of a navigation.
Fixed an issue where the distance remaining field would not update when using segments.
Fixed a potential issue where certain CIQ watchfaces could crash the device. (Requires Display 2.30)
Made various bug fixes and code improvements to improve stability.
Changes made from version 2.90 to 3.30:
Added support for managing automatic software updates (Settings > System > Software Update > Auto Update). Setting Auto Update to 'Off' will disable downloads of software updates using Garmin Connect Mobile and Wi-Fi.
Added support for hiding the distance to next field, shown by default on the map page while navigating. (Settings > Navigation > Data Screens > Map > Data Field)
Added support for viewing navigation data pages on the Head Mounted Display (HMD).
Improved the power controls menu and introduced a 'disabled' state for connected features like Find My Phone, Music Controls etc. These applications will no longer disappear from the power controls menu, when the user has lost connection to the Garmin Connect Mobile App.
Added support for managing unit settings for pressure, altimeter and temperature from corresponding widget settings menu.
Improved the reliability of LiveTrack.
Improved the responsiveness of steps auto-goal.
Improved the activity settings menu by hiding GPS specific settings when GPS is turned off.
Fixed an issue where coordinate entry was not working correctly for Russian and Hungarian.
Fixed an issue, where the watch would incorrectly report that GPS signal was lost, while using UltraTrac.
Fixed a potential issue where the currently selected watch face may change after a software update.
Fixed an issue where the device could crash when applying a FaceIt watch face from the Garmin Connect Mobile App.
Fixed an issue, where the option to 'Copy Activity' was present in the main menu for non-copyable apps like Golf.
Fixed an issue, where the unit would crash when creating a custom alert for a new 'Other' app.
Fixed an issue, where the virtual partner fields, 'Time Ahead' and 'Time Behind' won't update during an activity.
Fixed an issue, where an empty elevation plot was being displayed during activity review for apps like, 'Rowing', which doesn't record elevation data.
Fixed an issue, where the device was calculating VO2 max for activities using UltraTrac.
Fixed an issue, where the option to 'Copy Activity' was present in the main menu for non-copyable apps like Golf.
Fixed an issue, where one couldn't rename a course on the device.
Fixed a potential issue, where a Fenix 5X device could crash while loading segments with names that had special characters.
Fixed a potential issue, where saving a new round trip course could corrupt an existing round trip course on the device.
Fixed a potential issue, where panning and zooming BirdsEye imagery on the map could crash the device.
Changes made from version 2.40 to 2.90:
Added support for GroupTrack with Livetrack. (Garmin Connect Mobile > Menu > Livetrack > GroupTrack.)
Added support for Bontrager bike lights.
Added support for 'Countdown Start' when using Pool Swim. (Settings > Activities and Apps > Pool Swim > Pool Swim Settings > Countdown Start)
Added support for recording FIT files with Golf activities.
Added instructional tips for the Training Status page and Performance widget.
Added support for Connect IQ apps to access Bike Light features.
Added support for Running Dynamics Pod.
Improved the consistency of POI results when using Around Me.
Improved messaging for when a course exceeds the device's course point limit.
Improved the consistency of search results when scanning on the map.
Improved Round-Trip Routing.
Fixed an issue with Virtual Partner not displaying time ahead/behind information correctly.
Fixed an intermittent issue where the Fenix device won't auto connect to the Mobile app after powering up.
Fixed a couple of scenarios where the 'In-activity' backlight settings were not being respected.
Fixed an issue where the device could crash while creating custom alerts for 'Other' apps.
Fixed an issue where Wi-Fi was still offered as a Hotkey on non-WIFI devices.
Fixed a potential issue with Portuguese and Hebrew keyboards.
Fixed a potential issue where LiveTrack does not stop after ending an activity.
Fixed crash that could occur when course files with special characters were loaded.
Fixed a potential issue where the device is not able to import certain GPX files.
Fixed an issue where one couldn't import files from Basecamp to the device.
Fixed a potential issue where the unit could crash while viewing BirdsEye imagery on the map.
Fixed a potential issue where a long course with segment data could crash the device.
Made general improvements to increase product stability.
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]
as of September 22, 2017
Notes:
WARNING: If this software is uploaded to a device other than that for which it is designed, you will not be able to operate that device.
If attempts to upload software fail, you may need to return the device to Garmin for service.
Change History
Changes made from version 5.40 to 6.00:
Added support for Rep Counting during Strength and Cardio workouts which can be created on Garmin Connect Web and Garmin Connect Mobile. To enable Rep Counting, ensure that Settings > Activities & Apps > Strength > Rep Counting is enabled. Start the timer to automatically count reps during sets. Press the lap key to rest between sets. You can edit your last set's number of reps and weight during a rest period. Press the lap key to advance to the next set.
Added support for All-Day Stress. To view the Stress widget, hold the Up key from any widget, and select Add Widget > Stress. You can view your current stress measurement on the widget page. Press the enter key to view a graph of your stress over the last four hours. Press Down to access the Four-Fold Breath relaxation timer.
Added support for setting up Wi-Fi Networks on device. After syncing with Garmin Express or Garmin Connect Mobile at least once, go to Settings > Wi-FI > Add Network to search for Wi-Fi networks. Select a network. If the network is secure, enter its password to join it.
Added support for manual calibration of the Barometer. (Settings > Sensors & Accessories > Barometer > Calibrate)
Added support for Hourly Alerts. (Settings > System > Time > Alerts > Hourly)
Added support for configuring the track color of saved activities. (Settings > Map > Track Color)
Improved device key handling while using Connect IQ apps.
Improved the course navigation icons for better visibility and contrast.
Fixed an issue causing Varia UT800 Smart Headlights to periodically disconnect or power off during a ride.
Fixed an issue causing the Running Dynamics Pod to disconnect when using Connect IQ Apps.
Fixed a potential issue preventing a course from being joined when not joining it at the start.
Fixed a potential issue causing Personal Records to be reported inaccurately.
Fixed an issue where the device would not transition to the climb screen while using Auto Climb in certain situations.
Fixed an issue where the sunrise and sunset alarms were not working as expected.
Fixed an issue where the elevation plot for a single activity in a multisport, would display the elevation history of the entire activity.
Fixed an issue where certain artifacts were being drawn on the map page while panning or zooming.
Fixed an issue where the device might crash when editing settings for a multisport activity during a transition.
Fixed an issue where the map would not refresh course data if it was edited during active navigation.
Fixed a potential issue where the watch may appear frozen on the watchface, when exiting out early from an active course route calculation.
Fixed a potential issue preventing some Training Status data from being uploaded to Garmin Connect.
Changes made from version 5.30 to 5.40:
Fixed an issue in which optical heart rate became much less precise during an activity if Connect IQ apps were installed on the watch.
Fixed an issue in which the prompt to enter scores between holes during Golf activities was not shown.
Changes made from version 5.10 to 5.30:
Added support for Treadmill Calibration. When saving a Treadmill running activity for the first time, you will be given the option to enter the distance that the treadmill recorded. This will improve the accuracy of the distance that the watch records during future treadmill activities. You can also choose to calibrate when saving any treadmill activity. When you are done with your activity, stop the timer, scroll down to 'Calibrate & Save.' Then, enter the distance that the treadmill recorded. For accuracy, these options become available when recording an activity longer than 1 mile or 1.5 kilometers.
Added support for Connect IQ SDK 2.3.2.
Added support for viewing distances to Golf hazards and course targets.
Added support for persisting Heart Rate data on the widget across a power cycle.
Added support for viewing smart notifications on Varia Vision.
Added support for configuring the Controls menu with more than 10 items.
Added support for accessing Altimeter, Barometer and Compass widgets through the Controls menu.
Added support for adjusting the device backlight using the Controls menu.
Added support for 'Flashlight'. This will be accessible from the System Hotkeys and the Controls menu.
Improved the altimeter and barometer locking mechanism for water sport activities.
Improved the readability of long golf course names on device.
Fixed an issue where the user might see a blank black banner while navigating a shorter course.
Fixed an issue where the device would crash when attempting to continue a paused golf round.
Fixed an issue where the Virtual partner page was being incorrectly added to the activity data page loop while navigating.
Fixed a potential issue where large elevation values were being reported on the summary page for certain activities.
Fixed a potential issue where certain activities would show extremely high total elapsed time when trying to save them.
Fixed an issue where the gesture backlight was not working as expected during Do Not Disturb.
Fixed an issue where the heart rate target gauge would not work as expected during a workout when using wrist based heart rate.
Fixed an issue where the directions displayed on the Dog Tracker widget would not update in real time.
Fixed a potential issue where the data field page may have ghost lines when visiting the DogTracker page during an activity.
Fixed an issue where the device may not respond to button presses when using the lap key during a lap Swimming workout with Drill log disabled.
Fixed an issue where the backlight would turn off (outside of an activity) even though the backlight setting was set to 'No Timeout'.
Fixed an issue where routes created on Basecamp did not have elevation information after being transferred to the device.
Fixed an issue where the device would appear to be frozen, when connected to a computer.
Fixed an issue where the cog value could not be set to a value higher than 45, while setting up a Shimano Di2 Shifter.
Improved the user experience and accuracy of the Round-trip Course feature.
Fixed an issue where the 'Distance remaining' data field was displaying incorrect data when navigating to a POI.
Fixed an issue where strange characters were appearing on the map for Abu Dhabi.
Fixed a potential issue where the device would snap the user's track to nearby roads on the map.
Fixed an issue where a FaceIt CIQ watchface would flash, when transitioning to the watch face. (Requires Display 2.40)
Fixed an issue where Sunrise and Sunset times were showing invalid values on a CIQ watch face. (Requires Display 2.40)
Changes made from version 4.10 to 5.10:
Added support for Treadmill Calibration. When saving a Treadmill running activity for the first time, you will be given the option to enter the distance that the treadmill recorded. This will improve the accuracy of the distance that the watch records during future treadmill activities. You can also choose to calibrate when saving any treadmill activity. When you are done with your activity, stop the timer, scroll down to 'Calibrate & Save.' Then, enter the distance that the treadmill recorded. For accuracy, these options become available when recording an activity longer than 1 mile or 1.5 kilometers.
Added support for Connect IQ SDK 2.3.2.
Added support for viewing distances to Golf hazards and course targets.
Added support for persisting Heart Rate data on the widget across a power cycle.
Added support for viewing smart notifications on Varia Vision.
Added support for configuring the Controls menu with more than 10 items.
Added support for accessing Altimeter, Barometer and Compass widgets through the Controls menu.
Added support for adjusting the device backlight using the Controls menu.
Added support for 'Flashlight'. This will be accessible from the System Hotkeys and the Controls menu.
Improved the altimeter and barometer locking mechanism for water sport activities.
Improved the readability of long golf course names on device.
Fixed an issue where the user might see a blank black banner while navigating a shorter course.
Fixed an issue where the device would crash when attempting to continue a paused golf round.
Fixed an issue where the Virtual partner page was being incorrectly added to the activity data page loop while navigating.
Fixed a potential issue where large elevation values were being reported on the summary page for certain activities.
Fixed a potential issue where certain activities would show extremely high total elapsed time when trying to save them.
Fixed an issue where the gesture backlight was not working as expected during Do Not Disturb.
Fixed an issue where the heart rate target gauge would not work as expected during a workout when using wrist based heart rate.
Fixed an issue where the directions displayed on the Dog Tracker widget would not update in real time.
Fixed a potential issue where the data field page may have ghost lines when visiting the DogTracker page during an activity.
Fixed an issue where the device may not respond to button presses when using the lap key during a lap Swimming workout with Drill log disabled.
Fixed an issue where the backlight would turn off (outside of an activity) even though the backlight setting was set to 'No Timeout'.
Fixed an issue where routes created on Basecamp did not have elevation information after being transferred to the device.
Fixed an issue where the device would appear to be frozen, when connected to a computer.
Fixed an issue where the cog value could not be set to a value higher than 45, while setting up a Shimano Di2 Shifter.
Improved the user experience and accuracy of the Round-trip Course feature.
Fixed an issue where the 'Distance remaining' data field was displaying incorrect data when navigating to a POI.
Fixed an issue where strange characters were appearing on the map for Abu Dhabi.
Fixed a potential issue where the device would snap the user's track to nearby roads on the map.
Fixed an issue where a FaceIt CIQ watchface would flash, when transitioning to the watch face. (Requires Display 2.40)
Fixed an issue where Sunrise and Sunset times were showing invalid values on a CIQ watch face. (Requires Display 2.40)
Changes made from version 3.30 to 4.10:
Added support for Connect IQ 2.3.1 SDK. See the Connect IQ 2.3.1 SDK for a list of new features.
Added support for pre-defined Alarm labels. (Menu > Clock > Alarm Clock > Select an alarm > Label)
Added support for new VIRB remote commands.
Added support for adding widgets through the context menu. (Scroll to a widget > Menu Key)
Improved the VIRB widget to accurately reflect the settings available on the connected VIRB, which may vary with model.
Fixed an issue where the activity summary information for multisport profiles only represented data from the last leg.
Fixed an issue where the device screen seems to pulsate when using a white background, in low power mode.
Fixed an issue where ConnectIQ data fields were not able to record information to FIT files.
Fixed an issue where the HMD configuration won't match what is being displayed on device.
Fixed an issue where the device backlight would not work as expected when Do Not Disturb was enabled.
Fixed an issue where the 'Lap Ascent' field was not displaying valid data on the lap alert page.
Fixed an issue where the Indoor Row summary information was displaying distance metrics, instead of stroke data.
Fixed a potential issue where the device could freeze when dismissing multiple smart notifications.
Fixed a potential issue where the Training Effect value on post activity summary won't match the value shown on Garmin Connect.
Improved the consistency of routing results when using segments with courses.
Fixed an issue where the map wouldn't feel responsive when the user was off-course at the beginning of a navigation.
Fixed an issue where the distance remaining field would not update when using segments.
Fixed a potential issue where certain CIQ watchfaces could crash the device. (Requires Display 2.30)
Made various bug fixes and code improvements to improve stability.
Changes made from version 2.90 to 3.30:
Added support for managing automatic software updates (Settings > System > Software Update > Auto Update). Setting Auto Update to 'Off' will disable downloads of software updates using Garmin Connect Mobile and Wi-Fi.
Added support for hiding the distance to next field, shown by default on the map page while navigating. (Settings > Navigation > Data Screens > Map > Data Field)
Added support for viewing navigation data pages on the Head Mounted Display (HMD).
Improved the power controls menu and introduced a 'disabled' state for connected features like Find My Phone, Music Controls etc. These applications will no longer disappear from the power controls menu, when the user has lost connection to the Garmin Connect Mobile App.
Added support for managing unit settings for pressure, altimeter and temperature from corresponding widget settings menu.
Improved the reliability of LiveTrack.
Improved the responsiveness of steps auto-goal.
Improved the activity settings menu by hiding GPS specific settings when GPS is turned off.
Fixed an issue where coordinate entry was not working correctly for Russian and Hungarian.
Fixed an issue, where the watch would incorrectly report that GPS signal was lost, while using UltraTrac.
Fixed a potential issue where the currently selected watch face may change after a software update.
Fixed an issue where the device could crash when applying a FaceIt watch face from the Garmin Connect Mobile App.
Fixed an issue, where the option to 'Copy Activity' was present in the main menu for non-copyable apps like Golf.
Fixed an issue, where the unit would crash when creating a custom alert for a new 'Other' app.
Fixed an issue, where the virtual partner fields, 'Time Ahead' and 'Time Behind' won't update during an activity.
Fixed an issue, where an empty elevation plot was being displayed during activity review for apps like, 'Rowing', which doesn't record elevation data.
Fixed an issue, where the device was calculating VO2 max for activities using UltraTrac.
Fixed an issue, where the option to 'Copy Activity' was present in the main menu for non-copyable apps like Golf.
Fixed an issue, where one couldn't rename a course on the device.
Fixed a potential issue, where a Fenix 5X device could crash while loading segments with names that had special characters.
Fixed a potential issue, where saving a new round trip course could corrupt an existing round trip course on the device.
Fixed a potential issue, where panning and zooming BirdsEye imagery on the map could crash the device.
Changes made from version 2.40 to 2.90:
Added support for GroupTrack with Livetrack. (Garmin Connect Mobile > Menu > Livetrack > GroupTrack.)
Added support for Bontrager bike lights.
Added support for 'Countdown Start' when using Pool Swim. (Settings > Activities and Apps > Pool Swim > Pool Swim Settings > Countdown Start)
Added support for recording FIT files with Golf activities.
Added instructional tips for the Training Status page and Performance widget.
Added support for Connect IQ apps to access Bike Light features.
Added support for Running Dynamics Pod.
Improved the consistency of POI results when using Around Me.
Improved messaging for when a course exceeds the device's course point limit.
Improved the consistency of search results when scanning on the map.
Improved Round-Trip Routing.
Fixed an issue with Virtual Partner not displaying time ahead/behind information correctly.
Fixed an intermittent issue where the Fenix device won't auto connect to the Mobile app after powering up.
Fixed a couple of scenarios where the 'In-activity' backlight settings were not being respected.
Fixed an issue where the device could crash while creating custom alerts for 'Other' apps.
Fixed an issue where Wi-Fi was still offered as a Hotkey on non-WIFI devices.
Fixed a potential issue with Portuguese and Hebrew keyboards.
Fixed a potential issue where LiveTrack does not stop after ending an activity.
Fixed crash that could occur when course files with special characters were loaded.
Fixed a potential issue where the device is not able to import certain GPX files.
Fixed an issue where one couldn't import files from Basecamp to the device.
Fixed a potential issue where the unit could crash while viewing BirdsEye imagery on the map.
Fixed a potential issue where a long course with segment data could crash the device.
Made general improvements to increase product stability.
Έχει επεξεργασθεί από τον/την Santosan στις Κυρ 24 Σεπ 2017 - 18:00, 9 φορές συνολικά
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: fenix® 5X Device Firmware
Αναβάθμιση firm στην έκδοση 2.30, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: fenix® 5X Device Firmware
Αναβάθμιση firm στην έκδοση 2.40, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: fenix® 5X Device Firmware
Αναβάθμιση firm στην έκδοση 2.90, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: fenix® 5X Device Firmware
Αναβάθμιση firm στην έκδοση 3.30, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: fenix® 5X Device Firmware
Αναβάθμιση firm στην έκδοση 4.10, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: fenix® 5X Device Firmware
Αναβάθμιση firm στην έκδοση 5.10, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: fenix® 5X Device Firmware
Αναβάθμιση firm στην έκδοση 5.30, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: fenix® 5X Device Firmware
Αναβάθμιση firm στην έκδοση 5.40, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: fenix® 5X Device Firmware
Αναβάθμιση firm στην έκδοση 6.00, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Παρόμοια θέματα
» fenix® 5S Device Firmware
» fenix® 5 Device Firmware
» fēnix™ 2 Device Firmware
» fenix® 3 HR Device Firmware
» fenix® 3 HR Device Beta Firmware
» fenix® 5 Device Firmware
» fēnix™ 2 Device Firmware
» fenix® 3 HR Device Firmware
» fenix® 3 HR Device Beta Firmware
Σελίδα 1 από 1
Δικαιώματα σας στην κατηγορία αυτή
Δεν μπορείτε να απαντήσετε στα Θέματα αυτής της Δ.Συζήτησης
|
|