Oregon X50 Series Firmware

από **Santosan** Δευ 8 Οκτ 2012 - 20:50

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]

as of February 6, 2013

Notes:

IMPORTANT: if upgrading from a software version less than 4.80 you must follow these steps for future BaseCamp Compatibility:
If you are a user of BaseCamp now, or plan to be in the future, you must follow these steps to ensure your data is protected during this software update:
Connect your handheld unit to a computer and launch BaseCamp. Transfer all tracks, routes and waypoints to BaseCamp.
Delete the /Garmin/GPX folder from the handheld's mass storage.
Update the handheld's software via WebUpdater and reboot the handheld.
Reconnect the handheld to a computer and transfer your data from BaseCamp back to the handheld.

Change History

Changes made from version 6.40 to 6.60:

Added support for additional ActiveRouting cartography
Improved display of marine-specific lines in BlueChart g2 maps
Fixed issue retrieving PLSS data in certain TOPO US 24k maps

Changes made from version 6.30 to 6.40:

Added support for VIRB Remote. Setup > Main Menu to add. See TrailTech (http://garmin.blogs.com/softwareupdates/2013/08/VIRB-remote.html) for more information.
Fixed issue with route calculations always avoiding seasonally closed roads

Changes made from version 6.20 to 6.30:

Added support for additional ActiveRouting cartography
Fixed issue with incorrect letter capitalization of certain map points
Fixed issue where wirelessly transmitting a geocache to another device would result in an error message when trying to view the received geocache in BaseCamp

Changes made from version 6.10 to 6.20:

Improved map performance in densely-populated urban areas.
Fixed trail searching when using multiple active routing maps.
Fixed issue with saving a track's 'show on map' status across a power cycle.
Fixed issue with displaying tracks on the map after performing an area calculation.
Fixed potential shutdown when viewing certain tracks or routes in German or Russian.
Fixed minor graphical issue with certain data fields on the map.

Changes made from version 6.00 to 6.10:

Improved ascent and descent calculations.

Changes made from version 5.90 to 6.00:

Improved map drawing at low zoom levels.
Fixed inability to edit archived tracks.
Fixed ability to use NMEA depth for waypoints and tracks.
Fixed display of geocache coordinates with non-default map datum.
Fixed potential issue with reporting tempe temperature data.
Fixed overlapping position text for right to left languages.

Changes made from version 5.80 to 5.90:

Added Adventure support with latest version of BaseCamp. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/garmin-adventures.html) for more information.
Added support for new tempe sensor. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/tempe-sensor.html) for more information.

Changes made from version 5.50 to 5.80:

Added new route activity types and improved BaseCamp compatibility. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/05/get-active-with-garmin.html) for more information.
Added support for Kenwood NMEA Waypoint Sentence
Improved GPS response at low speeds
Fixed issue with preserving routes imported from BaseCamp (identical maps required)
Fixed Spell Search in German
Fixed possible issue with Where To? > Address searching

Changes made from version 5.60 to 5.70:

Fixed an issue with the reporting of pressure from the barometric altimeter
Fixed possible issue with changing avoidance settings while actively routing
Problems with this software may be reported to [Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]

Changes made from version 5.50 to 5.60:

Added new route activity types and improved BaseCamp compatibility. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/05/get-active-with-garmin.html) for more information.
Added support for Kenwood NMEA Waypoint Sentence
Improved GPS response at low speeds
Fixed issue with preserving routes imported from Basecamp (identical maps required)
Fixed Spell Search in German
Problems with this software may be reported to [Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]

Changes made from version 5.40 to 5.50:

Improved GPS response at low speeds.
Fixed potential issue when exiting geocache descriptions

Changes made from version 5.20 to 5.40:

Added Geocaching with Photos (http://garmin.blogs.com/softwareupdates/2012/01/geocaching-with-photos.html)
Fixed potential naming issues with imported routes from BaseCamp
Fixed issue with 'Hut' point type in TOPO Australia & New Zealand maps
Fixed issue with magnetic north offset when projecting a waypoint
Fixed issue with track log recording while using the stopwatch
Fixed mass storage issue when used without batteries

Changes made from version 5.10 to 5.20:

Fixed potential power-up issue introduced in previous release.

Changes made from version 5.00 to 5.10:

Improvements to the geocaching experience. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/improved-geocaching.html) for more information.
Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
Fixed issue with very long geocache descriptions
Fixed shutdown when reviewing certain geocache descriptions
Fixed issue where the photo orientation would be incorrect in the photo viewer
Fixed potential shutdown while scrolling through Garmin Connect photos
Fixed issue where some auto-archived tracks would be named in English regardless of user language
Fixed bug that could cause some geocaches to not import

Changes made from version 4.80 to 5.00:

Modified default map trails to appear as dashed red lines
Fixed issue where geocache icons would sometimes not draw on the map while using Garmin GB Discoverer™ maps

Changes made from version 4.50 to 4.80:

Added support for advanced geocache logging with OpenCaching.com. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/08/advanced-geocache-logging-with-opencachingcom.html) for more information.
Fixed issue with multilingual custom POI files

Changes made from version 4.20 to 4.50:

Updated magnetic Earth field data
Improved GPS performance
Improved support for BirdsEye™ Satellite Imagery (each provider's imagery can be configured independently)
Increased the maximum number of supported JNX files to 250 from 200
Fixed issues with WAAS/EGNOS
Fixed issue with track navigation sometimes not adding waypoints to the Active Route list
Fixed issue with MPC map labels disappearing
Fixed shutdown on the map page when you have a geocache dashboard active and return after pressing the geocache name
Fixed issue with moon not showing on sun and moon page
Fixed issue with photo viewer not displaying correctly
Fixed issue with progress bar displaying properly on power up
Fixed issue with waypoint distances showing significantly off in the waypoint manager
Fixed issue with 3D view
Fixed issue with track navigation not adding waypoints to the Active Route list when they are exactly equal to a track point
Fixed shutdown when more than the maximum number of JNX files were present
Fixed 'Search Near' functionality on Hunt & Fish and Sun & Moon pages
Fixed shutdown related to topographical maps and land cover text size
Fixed shutdown associated with certain custom POI files
Fixed Glide Ratio to Destination field
Fixed problem with profiles and the fields on the map page
Fixed an issue with magnetic north reference and waypoint headings
Fixed shutdown on the map screen when a waypoint was being moved to the same location as a geocache or other POIs
Fixed an issue with archived tracks not displaying properly
Fixed an issue with having too many custom symbols on the device
Fixed an issue with renaming a waypoint immediately after creating it
Modified the 'Arriving at Destination' message banner so that it no longer appears when navigating to a geocache

Changes made from version 4.00 to 4.20:

Fixed shutdown related to the current track that occurred after updating the software
Fixed a hang that occurred when a unit had 1000 auto-named waypoints

Changes made from version 3.90 to 4.00:

Added support for Chirp™.
Fixed problem with certain custom maps.
Fixed problem with certain JPEG images.
Fixed issue with Sight 'N Go and user north reference.
Fixed potential hang on start up after an upgrade.

Changes made from version 3.80 to 3.90:

Fixed issue while using spell search in route planner.
Fixed issue on 3D View where vehicle could move after using the map.
Fixed issue where tracks could not be disabled from the map.
Fixed issues with odometer distance.
Fixed shutdown while panning the map for extended periods of time.

Changes made from version 3.40 to 3.80:

Added ability to move waypoints using the map
Added ability to set user declination direction
Added Automatic Shaded Relief option
Added brightness adjustments for BirdsEye imagery
Added display color to track gpx files
Added Geocache filtering. Select Setup > Geocaches to add custom filters
Added import indicator for gpx files
Added multicaching support
Added periodic track archiving
Added track review page improvements
Improved keyboard responsiveness
Improved WAAS performance
Fix hang searching for POI
Fixed elevation profiles to always use the most detailed DEM data loaded
Fixed future plot with tracks that have no elevations in them
Fixed issue with calculator % function
Fixed issue with map POI's showing twice for a single point
Fixed issue with Oblique Mercator User grid
Fixed issue with stuck route button.
Fixed occasional shutdowns
Fixed shutdown on About Page
Fixed spot sounding display on certain maps
Updated map review of tracks and routes. The distance shown is now the distance along the route or track.

Changes made from version 3.30 to 3.40:

Added BirdsEye control to Profiles.
Fixed map display problems.

Changes made from version 3.20 to 3.30:

Added support for Garmin BirdsEye.
Added mmHg pressure units.
Added support for Riyadh time zone.
Added ability to change active track color.
Added option to calibrate screen under Setup->Display.
Added custom waypoint symbol and geocache symbol support.

Changes made from version 3.10 to 3.20:

Fixed issue with units getting stuck in demo mode.
Fixed color issues with GB Discoverer and Custom Maps.
Fixed issue where portions of GB Discoverer Maps would disappear.

Changes made from version 3.00 to 3.10:

Increased the map drawing range to allow maps to draw farther south.
Corrected issue with route line sometimes not drawing.
Corrected issues with marine POI.
Corrected issues with GB Discoverer maps.
Corrected issues with possible corrupted profile showing on the Profile Change page.
Corrected issue with project waypoint bearing sometimes not showing the input value.

Changes made from version 2.70 to 3.00:

Added ability to view elevation plot of upcoming active route or currently navigated track in blue.
Added display of icons to the lists in Where To? > Waypoints and the Geocaching application.
Added phone numbers when available to POI review pages.
Added Compass, Stopwatch, Active Geocache, and Elevation Plot dashboard options.
Introduced dashboard options to the Compass and Map pages.
Improved track navigation. Visit [Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.] for more information.

Changes made from version 2.60 to 2.70:

Added profile support for Garmin Custom Maps
Fixed lockup while using GB Discoverer maps

Changes made from version 2.30 to 2.60:

Added support for Garmin Custom Maps
Added heading to geotagged photo EXIF information (see GPSImgDirection and GPSImgDirectionRef tags)
Improved along road routing performance
Improved support for importing geotagged photos to various desktop applications
Corrected issues causing some geotagged photos to be drawn at incorrect location on the map

Changes made from version 2.10 to 2.30:

Added LKS92 map datum
Added GPS firmware 3.70
Added support for GPI Routes
Added thumbnail to camera page for quick review/deletion of most recently created photo
Added estimation of the number of remaining photos that the unit can take
Improved compass responsiveness
Fixed possible shutdown from low alkaline batteries when on camera page
Fixed possible shutdown due to deleting a waypoint while panning on the map page
Fixed issue where multiple GB Discoverer maps would not draw
Fixed issue with the address wizard not searching in the correct city
Fixed issue with backlight timer not functioning properly
Fixed user heading setting for mils so that all applicable headings are displayed with the correct heading format