eTrex 20 & 30 Series Beta Firmware

από **Santosan** Δευ 8 Οκτ 2012 - 18:09

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]

as of October 9, 2012

Notes:

Although this software is believed to be reliable, it has not yet been released for production and should be used at your own risk.

Installation Instructions

Connect your GPS to your computer using a GARMIN USB cable
Click the download link above
Choose either Run or Save
If you have chosen Run, follow the download clients prompts
If you have chosen Save, locate the saved file and click it to launch
Next, follow the download clients prompts
Once the beta update is complete, insure fresh, fully charged batteries are in your GPS. Any disruptions during the update process may render your GPS inoperable.
Once the download client has completed, unplug your GPS from the computer and power on
The update process will now begin. When complete, the device will reset automatically.

Change History

Changes made from version 2.80 to 2.87:

Added Adventure support with latest version of BaseCamp. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/garmin-adventures.html) for more information.
Added support for new tempe sensor on eTrex 30 devices. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/tempe-sensor.html) for more information.
Improved accuracy of compass calibration on eTrex 30 devices. A new manual compass calibration is required (Setup > Heading > Calibrate Compass).
Improved map drawing at low zoom levels.
Improved load times for geocache descriptions.
Fixed issue with preserving routes imported from BaseCamp (identical maps required).
Fixed issue with picture rotation when using the photo viewer on eTrex 30 devices.
Fixed possible error message when disconnecting the device from a computer.
Issues with this beta software may be reported to [Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]

Changes made from version 2.71 to 2.73:

Improved ability to clear unit settings on power up: now only requires menu key and enter key to be held when powering the unit on
Improved size of roads drawn on map in 'automotive mode' orientation
Fixed issue that was causing some devices to display a 'memory full' message followed by bad device behavior
Problems with this beta software may be reported to [Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]

Changes made from version 2.70 to 2.71:

Improved GPS response at low speeds
Improved elevation data stored in track logs (etrex 30)
Fixed issue with distance to destination data field
Fixed occasional overlapping of data fields in the elevation application
Problems with this beta software may be reported to [Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]

Changes made from version 2.60 to 2.61:

Improved GPS response at low speeds

από **Santosan** Παρ 12 Οκτ 2012 - 22:23

Εχουμε αναβαθμιση στην εκδοση 2.87 beta, εχει ενημερωθει το πρωτο post.

eTrex 20 & 30 Series Beta Firmware

eTrex 20 & 30 Series Beta Firmware

Απ: eTrex 20 & 30 Series Beta Firmware