My Garmin Sat Nav
Καλώς ήλθατε στο My Garmin Sat Nav ‼️

Πρέπει να συνδεθείτε ή να κάνετε εγγραφή γιά να έχετε πρόσβαση σε όλο το forum

Welcome to My Garmin Sat Nav !!

You must Log in or Register to gain full forum access



Εγγραφείτε στο φόρουμ, είναι εύκολο και γρήγορο

My Garmin Sat Nav
Καλώς ήλθατε στο My Garmin Sat Nav ‼️

Πρέπει να συνδεθείτε ή να κάνετε εγγραφή γιά να έχετε πρόσβαση σε όλο το forum

Welcome to My Garmin Sat Nav !!

You must Log in or Register to gain full forum access

My Garmin Sat Nav
Θέλετε να αντιδράσετε στο μήνυμα; Φτιάξτε έναν λογαριασμό και συνδεθείτε για να συνεχίσετε.

Forerunner® 935 Device Firmware

Πήγαινε κάτω

Forerunner® 935 Device Firmware Empty Forerunner® 935 Device Firmware

Δημοσίευση από Santosan Κυρ 2 Απρ 2017 - 9:59

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]

as of September 21, 2017

Notes:

WARNING: If this software is uploaded to a device other than that for which it is designed, you will not be able to operate that device.
If attempts to upload software fail, you may need to return the device to Garmin®️ for service.


Change History

Changes made from version 5.40 to 6.00:

   Added support for Rep Counting during Strength and Cardio workouts which can be created on Garmin Connect Web and Garmin Connect Mobile. To enable Rep Counting, ensure that Settings > Activities & Apps > Strength > Rep Counting is enabled. Start the timer to automatically count reps during sets. Press the lap key to rest between sets. You can edit the number of reps and weight for your last set during a rest period. Press the lap key to advance to the next set.
   Added support for All-Day Stress. To view the Stress widget, hold the Up key from any widget and select Add Widget > Stress. You can view your current stress measurement on the widget page. Press the enter key to view a graph of your stress over the last four hours. Press Down to access the Four-Fold Breath relaxation timer.
   Added support for setting up Wi-Fi Networks on device. After syncing with Garmin Express or Garmin Connect Mobile at least once, go to Settings > Wi-FI > Add Network to search for Wi-Fi networks. Select a network. If the network is secure, enter its password to join it.
   Added support for manual calibration of the Barometer. (Settings > Sensors & Accessories > Barometer > Calibrate)
   Added support for Hourly Alerts. (Settings > System > Time > Alerts > Hourly)
   Improved device key handling while using Connect IQ apps.
   Improved the course navigation icons for better visibility and contrast.
   Fixed an issue causing Varia UT800 Smart Headlights to periodically disconnect or power off during a ride.
   Fixed an issue causing the Running Dynamics Pod to disconnect when using Connect IQ Apps.
   Fixed a potential issue preventing a course from being joined when not joining it at the start.
   Fixed a potential issue causing Personal Records to be reported inaccurately.
   Fixed an issue where the device would not transition to the climb screen while using Auto Climb in certain situations.
   Fixed an issue where the sunrise and sunset alarms were not working as expected.
   Fixed an issue where the elevation plot for a single activity in a multisport activity would display the elevation history of the entire activity.


Changes made from version 5.30 to 5.40:

   Fixed an issue in which optical heart rate became much less precise during an activity if Connect IQ apps were installed on the watch.
   Fixed an issue in which the prompt to enter scores between holes during Golf activities was not shown.


Changes made from version 5.10 to 5.30:

   Added support for Treadmill Calibration. When saving a Treadmill running activity for the first time you will be given the option to enter the distance that the treadmill recorded. This will improve the accuracy of the distance that the watch records during future treadmill activities. You can also choose to calibrate when saving any treadmill activity. When you are done with your activity, stop the timer, scroll down to 'Calibrate & Save', then enter the distance the treadmill recorded. These options become available when recording an activity longer than 1 mile or 1.5 kilometers to maintain accuracy.
   Added support for Connect IQ SDK 2.3.2.
   Added support for viewing distances to Golf hazards and course targets.
   Added support for persisting Heart Rate data on the widget across a power cycle.
   Added support for viewing smart notifications on Varia Vision.
   Added support for configuring the Controls menu with more than 10 items.
   Added support for accessing Altimeter, Barometer, and Compass widgets through the Controls menu.
   Added support for adjusting the device backlight using the Controls menu.
   Added support for 'Flashlight'. This will be accessible from the System Hotkeys and the Controls menu.
   Improved the altimeter and barometer locking mechanism for water sport activities.
   Improved the readability of long golf course names on device.
   Fixed an issue where the user might see a blank black banner while navigating a shorter course.
   Fixed an issue where the device would crash when attempting to continue a paused golf round.
   Fixed an issue where the Virtual partner page was being incorrectly added to the activity data page loop while navigating.
   Fixed a potential issue where large elevation values were being reported on the summary page for certain activities.
   Fixed a potential issue where certain activities would show extremely high total elapsed time when trying to save them.
   Fixed an issue where the gesture backlight was not working as expected during Do Not Disturb.
   Fixed an issue where the heart rate target gauge would not work as expected during a workout when using wrist based heart rate.
   Fixed an issue where the directions displayed on the Dog Tracker widget would not update in real time.
   Fixed a potential issue where the data field page may have ghost lines when visiting the DogTracker page during an activity.
   Fixed an issue where the device may not respond to button presses when using the lap key during a lap Swimming workout with Drill log disabled.
   Fixed an issue where the backlight would turn off (outside of an activity) even though the backlight setting was set to 'No Timeout'.
   Fixed an issue where routes created on Basecamp did not have elevation information after being transferred to the device.
   Fixed an issue where the device would appear to be frozen when connected to a computer.
   Fixed an issue where the cog value could not be set to a value higher than 45 while setting up a Shimano Di2 Shifter.
   Fixed an issue preventing some HRM-Run devices from installing software updates.


Changes made from version 4.10 to 5.10:

   Added support for Treadmill Calibration. When saving a Treadmill running activity for the first time you will be given the option to enter the distance that the treadmill recorded. This will improve the accuracy of the distance that the watch records during future treadmill activities. You can also choose to calibrate when saving any treadmill activity. When you are done with your activity, stop the timer, scroll down to 'Calibrate & Save', then enter the distance the treadmill recorded. These options become available when recording an activity longer than 1 mile or 1.5 kilometers to maintain accuracy.
   Added support for Connect IQ SDK 2.3.2.
   Added support for viewing distances to Golf hazards and course targets.
   Added support for persisting Heart Rate data on the widget across a power cycle.
   Added support for viewing smart notifications on Varia Vision.
   Added support for configuring the Controls menu with more than 10 items.
   Added support for accessing Altimeter, Barometer, and Compass widgets through the Controls menu.
   Added support for adjusting the device backlight using the Controls menu.
   Added support for 'Flashlight'. This will be accessible from the System Hotkeys and the Controls menu.
   Improved the altimeter and barometer locking mechanism for water sport activities.
   Improved the readability of long golf course names on device.
   Fixed an issue where the user might see a blank black banner while navigating a shorter course.
   Fixed an issue where the device would crash when attempting to continue a paused golf round.
   Fixed an issue where the Virtual partner page was being incorrectly added to the activity data page loop while navigating.
   Fixed a potential issue where large elevation values were being reported on the summary page for certain activities.
   Fixed a potential issue where certain activities would show extremely high total elapsed time when trying to save them.
   Fixed an issue where the gesture backlight was not working as expected during Do Not Disturb.
   Fixed an issue where the heart rate target gauge would not work as expected during a workout when using wrist based heart rate.
   Fixed an issue where the directions displayed on the Dog Tracker widget would not update in real time.
   Fixed a potential issue where the data field page may have ghost lines when visiting the DogTracker page during an activity.
   Fixed an issue where the device may not respond to button presses when using the lap key during a lap Swimming workout with Drill log disabled.
   Fixed an issue where the backlight would turn off (outside of an activity) even though the backlight setting was set to 'No Timeout'.
   Fixed an issue where routes created on Basecamp did not have elevation information after being transferred to the device.
   Fixed an issue where the device would appear to be frozen when connected to a computer.
   Fixed an issue where the cog value could not be set to a value higher than 45 while setting up a Shimano Di2 Shifter.


Changes made from version 3.30 to 4.10:

   Added support for Connect IQ 2.3.1 SDK. See the Connect IQ 2.3.1 SDK for a list of new features.
   Added support for predefined Alarm labels. (Menu > Clock > Alarm Clock > Select an alarm > Label)
   Added support for new VIRB remote commands.
   Added support for adding widgets through the context menu. (Scroll to a widget > Menu Key)
   Fixed an issue where Connect IQ data fields were not able to record information to FIT files.
   Fixed an issue where the device screen seems to pulsate when using a white background in low power mode.
   Fixed an issue where the 'Lap Ascent' and 'Lap Descent' fields were not displaying valid data on the lap alert page.
   Fixed an issue where the Indoor Row summary information was displaying distance metrics instead of stroke data.
   Fixed an issue where the activity summary information for multisport profiles only presented data from the last leg.
   Fixed an issue where the Varia Vision configuration won't match what is being displayed on device.
   Fixed a potential issue where the device could freeze when dismissing multiple smart notifications.
   Fixed a potential issue where the Training Effect value on post activity summary won't match the value shown on Garmin Connect.
   Improved the VIRB widget to accurately reflect the settings available on the connected VIRB, which may vary with model.
   Made various bug fixes and code improvements to improve stability.


Changes made from version 2.90 to 3.30:

   Added support for hiding the 'distance to next' field, shown by default on the map page while navigating. (Settings > Navigation > Data Screens > Map > Data Field)
   Added support for viewing navigation data pages on the Varia Vision.
   Improved the power controls menu and introduced a 'disabled' state for connected features like Find My Phone, Music Controls etc. These applications will no longer disappear from the power controls menu, when the watch has lost connection to the Garmin Connect Mobile App.
   Added support for managing automatic software updates (Settings > System > Software Update > Auto Update). Setting Auto Update to 'Off' will disable downloads of software updates using Garmin Connect Mobile and Wi-Fi.
   Added support for managing unit settings for pressure, altimeter, and temperature from corresponding widget settings menu.
   Improved the reliability of LiveTrack.
   Improved the responsiveness of steps auto-goal.
   Improved the activity settings menu by hiding GPS specific settings when GPS is turned off.
   Fixed an issue where coordinate entry was not working correctly for Russian and Hungarian.
   Fixed an issue where the watch would incorrectly report that GPS signal was lost while using UltraTrac.
   Fixed a potential issue where the currently selected watch face may change after a software update.
   Fixed an issue where the device could crash when applying a FaceIt watch face from the Garmin Connect Mobile App.
   Fixed an issue where the option to 'Copy Activity' was present in the main menu for non-copyable apps like Golf.
   Fixed an issue where the unit would crash when creating a custom alert for a new 'Other' app.
   Fixed an issue where the virtual partner fields, 'Time Ahead' and 'Time Behind', won't update during an activity.
   Fixed an issue where an empty elevation plot was being displayed during activity review for apps like, 'Rowing', which doesn't record elevation data.
   Fixed an issue where the device was calculating VO2 max for activities using UltraTrac.
   Fixed an issue where the distance remaining did not show the correct value when going off course.
   Fixed an issue where the hundredths portion of the stopwatch would occasionally display incorrectly.
   Fixed an issue preventing a data screen from being edited when it is the only active data screen.


Changes made from version 2.70 to 2.90:

   Fixed an issue where one couldn't import files from Basecamp to the device.
   Made general improvements to increase product stability.


Changes made from version 2.40 to 2.70:

   Added support for GroupTrack.
   Added support for Bontrager bike lights.
   Added countdown spinner for pool swim activities.
   Added message for when a course exceeds the device's course point limit.
   Added instructional tips for the Training Status page and Performance widget.
   Added recording of FIT files for Golf activites.
   Fixed issue with Virtual Partner not displaying time ahead/behind information correctly.
   Fixed broken Portuguese and Hebrew keyboards.
   Minor bug fixes and usability improvements.




Έχει επεξεργασθεί από τον/την Santosan στις Πεμ 28 Σεπ 2017 - 19:02, 6 φορές συνολικά
Santosan
Santosan
Administrator
Administrator

Άντρας Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879


Επιστροφή στην κορυφή Πήγαινε κάτω

Forerunner® 935 Device Firmware Empty Απ: Forerunner® 935 Device Firmware

Δημοσίευση από Santosan Σαβ 8 Απρ 2017 - 7:42

Αναβάθμιση firm στην έκδοση 2.90, έχει ενημερωθεί το πρώτο post.
Santosan
Santosan
Administrator
Administrator

Άντρας Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879


Επιστροφή στην κορυφή Πήγαινε κάτω

Forerunner® 935 Device Firmware Empty Απ: Forerunner® 935 Device Firmware

Δημοσίευση από Santosan Πεμ 11 Μάης 2017 - 20:33

Αναβάθμιση firm στην έκδοση 3.30, έχει ενημερωθεί το πρώτο post.
Santosan
Santosan
Administrator
Administrator

Άντρας Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879


Επιστροφή στην κορυφή Πήγαινε κάτω

Forerunner® 935 Device Firmware Empty Απ: Forerunner® 935 Device Firmware

Δημοσίευση από Santosan Σαβ 10 Ιουν 2017 - 9:11

Αναβάθμιση firm στην έκδοση 4.10, έχει ενημερωθεί το πρώτο post.
Santosan
Santosan
Administrator
Administrator

Άντρας Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879


Επιστροφή στην κορυφή Πήγαινε κάτω

Forerunner® 935 Device Firmware Empty Απ: Forerunner® 935 Device Firmware

Δημοσίευση από Santosan Παρ 11 Αυγ 2017 - 11:33

Αναβάθμιση firm στην έκδοση 5.10, έχει ενημερωθεί το πρώτο post.
Santosan
Santosan
Administrator
Administrator

Άντρας Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879


Επιστροφή στην κορυφή Πήγαινε κάτω

Forerunner® 935 Device Firmware Empty Απ: Forerunner® 935 Device Firmware

Δημοσίευση από Santosan Δευ 21 Αυγ 2017 - 13:08

Αναβάθμιση firm στην έκδοση 5.30, έχει ενημερωθεί το πρώτο post.
Santosan
Santosan
Administrator
Administrator

Άντρας Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879


Επιστροφή στην κορυφή Πήγαινε κάτω

Forerunner® 935 Device Firmware Empty Απ: Forerunner® 935 Device Firmware

Δημοσίευση από Santosan Παρ 8 Σεπ 2017 - 10:18

Αναβάθμιση firm στην έκδοση 5.40, έχει ενημερωθεί το πρώτο post.
Santosan
Santosan
Administrator
Administrator

Άντρας Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879


Επιστροφή στην κορυφή Πήγαινε κάτω

Forerunner® 935 Device Firmware Empty Απ: Forerunner® 935 Device Firmware

Δημοσίευση από Santosan Πεμ 28 Σεπ 2017 - 19:03

Αναβάθμιση firm στην έκδοση 6.00, έχει ενημερωθεί το πρώτο post.
Santosan
Santosan
Administrator
Administrator

Άντρας Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879


Επιστροφή στην κορυφή Πήγαινε κάτω

Επιστροφή στην κορυφή

- Παρόμοια θέματα

 
Δικαιώματα σας στην κατηγορία αυτή
Δεν μπορείτε να απαντήσετε στα Θέματα αυτής της Δ.Συζήτησης